Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Mesquite, NV
Hinge and post repair in Mesquite typically costs $150 to $420 for a single gate, and most jobs are finished in one visit. If your gate has started to sag, drag on the ground, or hang crooked from a post that has shifted, that’s the work we do. Hinges carry the entire weight of a swinging gate every time it opens, and posts anchor that weight into the ground. When either one gives, the gate stops closing clean, and the motor starts working harder to force it.
Ironworks Gate Co. Mesquite handles hinge and post repair as part of our full Gate Repair work. That means we look at the whole gate, not just the squeaky part. A hinge that failed might be telling you the post moved. A post that moved might be telling you the ground under it settled after a wet winter. Our technicians have up to 13 years of experience, and we’ve repaired steel, ornamental iron, and aluminum gates on LiftMaster and Elite operators across the Mesquite area. Call (844) 797-2573 and a live person will answer, day or night.
This isn’t a job worth putting off. A gate hanging on a failing hinge puts stress on the operator, the frame, and the welds, and a repair that costs a few hundred dollars today can turn into a motor replacement if you wait.
Key Takeaways
- Hinge and post repair in Mesquite runs $150 to $420 for most single-gate jobs, with same-day service common.
- Sagging, dragging, and crooked hanging are the three signs of hinge or post failure, and all three get worse with use.
- Most repairs are completed in a single visit with upfront pricing settled before we start.
- Every job carries our written 90-Day Done Right Promise: if it’s not right, we come back and make it right.
When You Need Hinge & Post Repair
Gates don’t fail overnight. They give you signs for months before the hinge snaps or the post leans far enough that the gate won’t latch. Here’s what we hear from homeowners in Mesquite when they call.
- The gate sags and drags on the ground. This is the most common call we get. The gate has dropped a half inch or more, and the bottom rail scrapes the driveway every time it swings. Sometimes a worn hinge is the culprit. Sometimes the post has settled and pulled the whole gate out of level.
- The gate hangs crooked or won’t latch. When a gate stops meeting the latch post square, the hinges or the post have moved. This one gets dangerous with automatic gates because the operator keeps pushing against a misaligned gate, which wears the gear and the arm.
- A hinge is loose, cracked, or missing bolts. Weld-on hinges can crack at the weld. Bolt-on hinges can work loose over the years. If you can wiggle the gate at the hinge and see movement, the hinge needs attention before it fails entirely.
- The post leans or wobbles. Mesquite’s soil shifts with our dry summers and the occasional heavy rain, and a post set shallow or set in soil that has settled will lean. If the post moves when you push on the gate, it’s a post problem, not a hinge problem.
- The gate squeals or grinds when it opens. A dry or worn hinge will squeal. A hinge with a worn pin will grind. Both are early warnings that the hinge is on its way out.
- Rust at the hinge or post base. Our desert climate is kind to metal compared to the coast, but irrigation runoff and sprinkler overspray will rust a hinge or eat at a post base over time. If you see bubbling paint or orange streaks at the hinge, that metal is thinning.
If any of those sound familiar, it’s worth a look before the problem grows. Our home page has the full picture of what we do.
Our Hinge & Post Repair Process
We keep the process simple and the pricing upfront. Here’s how a hinge and post repair goes from the first call to the final swing.
- You call, and a live person answers. No voicemail tree, no callback queue. We ask a few questions about the gate, the symptoms, and whether it’s automatic or manual, and we schedule a visit that works for you.
- We inspect the gate, hinges, and posts on site. We check hinge condition, weld integrity, post plumb, and the ground around the post base. We also check the operator if the gate is automatic, because a failing hinge can stress the motor and we want to catch that early.
- We give you an upfront price before we touch a bolt. No surprises on the bill. You’ll know what the repair costs and what it includes before we start.
- We make the repair. That might mean replacing worn hinges, welding a cracked hinge back to the frame, resetting or replacing a post, or tightening and re-leveling the gate. Most jobs are done in a single visit.
- We test the gate and walk it with you. We open and close it, check the latch, and make sure it swings clean. If it’s automatic, we test the operator cycle too.
- We back it in writing. Every job carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Hinge & Post Repair Pricing in Mesquite
Most hinge and post repairs in Mesquite fall between $150 and $420, depending on what’s actually wrong. Here’s a realistic breakdown of what drives that number.
| Repair | Typical Range |
|---|---|
| Hinge replacement (bolt-on) | $120 – $220 |
| Hinge replacement (weld-on) | $180 – $320 |
| Hinge weld repair (cracked weld) | $150 – $280 |
| Post reset or re-level | $200 – $400 |
| Post replacement (single post) | $300 – $650 |
| Full gate re-hang and alignment | $250 – $450 |
What affects the price: the number of hinges, whether the hinge is welded or bolted, the size and weight of the gate, whether the post needs resetting or full replacement, and whether the ground around the post needs repair. Heavy ornamental iron gates cost more to re-hang than a lighter aluminum gate. A post set in concrete takes more work to reset than one set in soil.
We settle the price with you before we start, and the estimate is free. We also have standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount. Our $89 seasonal tune-up covers hinge lubrication, latch alignment, and a full gate check, which is a good way to catch a worn hinge before it fails.
Wondering whether it’s cheaper to repair or replace? For most hinge and post jobs, repair is the clear answer. A quality gate frame outlasts its hardware. If the frame itself is sound, new hinges and a solid post will have the gate swinging like it did when it was new. Call (844) 797-2573 for an exact quote.
How do I know if the problem is the hinge or the post?
A wobble test tells you a lot. Push the gate at the hinge and watch where the movement is. If the gate moves but the post stays solid, it’s the hinge. If the post itself shifts, it’s the post. Most gates with several years on them need attention to both, which is why we check them together.
Can you repair a post set in concrete?
Yes. We can reset a post that’s pulled loose and replace a post that’s rusted through at the base. Most concrete-set posts can be repaired without breaking up the whole driveway area. How long it takes depends on the post and the ground.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Mesquite?
Most hinge and post repairs in Mesquite cost between $150 and $420, with a single hinge replacement on the low end and a post replacement on the high end. Heavy ornamental iron gates and jobs that need both a post reset and hinge replacement run toward the top of the range. Call (844) 797-2573 for an exact quote. Estimates are free.
Can you repair my gate today?
Yes, in most cases. Hinge and post repair is a same-day job for the vast majority of gates we see, and a live person answers our phone 24 hours a day, 7 days a week. Call (844) 797-2573 and we’ll tell you on the call when we can be there.
My gate sags but the hinges look fine. What else could it be?
A sagging gate with intact hinges usually points to the post. If the hinge post has settled, leaned, or pulled loose from the ground, the whole gate drops out of level even though the hinges are solid. We check post plumb and post base every time we look at a sag, so we fix the actual cause rather than just tightening hinges that are doing their job.
Is it cheaper to repair or replace my gate?
Repair is almost always cheaper when the gate frame is sound. A hinge and post repair runs a few hundred dollars, while a new gate and installation run into the thousands. The exception is a frame with rust through the rails or several cracked welds, where replacement makes more sense. We’ll tell you honestly which way to go. Call (844) 797-2573 and we’ll take a look.
If your gate is sagging, dragging, or hanging crooked, it’s not going to fix itself and the damage gets worse with every swing. Ironworks Gate Co. Mesquite repairs hinges and posts on steel, ornamental iron, and aluminum gates, works on LiftMaster, DoorKing, Elite, and other major operators, and backs every job with our written 90-Day Done Right Promise. Our technicians are background-checked and trained, and they carry up to 13 years of experience. Call (844) 797-2573 today for a free estimate, and we’ll get your gate swinging clean again.
Written by the team at Ironworks Gate Co. Mesquite, serving Mesquite.