Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Mesquite?
Gate repair in Mesquite typically costs $175 to $650, with most repairs landing around $240 to $380. A simple hinge or latch fix runs $175 to $280, a gate motor or opener repair runs $280 to $650, and a full gate replacement is a separate project starting near $1,800. We give you the price before we turn a bolt, so the number you hear is the number on the bill.
That range holds whether your gate is a wrought-iron driveway entry off Sandhill Boulevard or a sliding security gate near the Oasis. A few things move the price up or down, and we walk through all of them below with real 2026 numbers for the Mesquite market.
Key Takeaways
- Most Mesquite gate repairs run $240 to $380, with the full range from $175 to $650.
- Motor, opener, and access-control work costs more than hinge, latch, and weld repairs.
- Our technicians have up to 13 years of experience and service nine major automation brands.
- Every job is backed by the written 90-Day Done Right Promise, and a live person answers the phone 24 hours a day.
- We settle the price upfront, and estimates are free.
Gate Repair Cost Breakdown (2026)
Here is what the different jobs actually run in Mesquite this year. These are the ranges we quote at the start of the visit, not teaser prices that grow once the gate is apart.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Hinge and latch repair | $175 – $280 | Sagging, scraping, or misaligned swing gate; new hinges, latch, or strike |
| Weld and frame repair | $200 – $450 | Cracked frame, broken hinge mount, rust repair on wrought iron |
| Gate motor or opener repair | $280 – $650 | Motor, control board, limit switches, reversing sensors, or the opener arm |
| Access control and keypad | $250 – $600 | Keypad, key fob, loop detector, or intercom programming and wiring |
| Track and roller service (sliding) | $220 – $480 | Bent track, worn rollers, alignment, and travel limits |
| Gate replacement | $1,800 and up | New gate, hardware, and re-hanging; pricing depends on size and material |
What drives cost up: an automatic system instead of a manual gate, a brand that needs a specific control board, hard rock in the ground, or a gate that has been dragging for months and wore down the motor, track, or hinges along with the original part. What drives it down: catching a problem early, a manual gate over an automatic one, and hardware that is still available on the shelf. When we quote a repair, we check the whole system so we don’t fix one part while a worn one quietly fails next to it.
What Affects Gate Repair Pricing in Mesquite
- Manual vs. automatic. A swing gate with a worn latch is a hardware job. An automatic gate with the same latch dragging the motor is a hardware plus motor job, so the bill climbs from the $175-$280 range into the $280-$650 range.
- Brand and control board. We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When the system is one we service, we often have the correct part on the first visit. An off-brand or orphaned system can mean waiting on a special-order board, which adds to the parts cost.
- Mesquite’s desert conditions. The summer heat over 110°F and the wind-blown sand that rolls off the Virgin River corridor are hard on gate hardware. Sand works into rollers and hinge pins and wears them fast, and metal that has baked in full sun for a decade dries out and rusts at the welds. We see more frame and weld failures here than in milder climates, and those repairs land in the $200-$450 range.
- Gate size and material. A tall, heavy estate gate in solid wrought iron loads the hinges and motor far more than a lighter driveway gate, so it needs heavier hardware and sometimes a bigger motor. Both raise the cost.
- Access control and wiring. Keypads, fobs, loop detectors, and intercoms add $250 to $600 depending on what is already wired. Adding automation to a gate that was never wired for it means pulling new low-voltage line.
- Type of gate. Sliding gates bring track and roller service into the picture, while swing gates concentrate the cost in hinges, latches, and the opener arm. A sliding gate with a bent track can run $220 to $480 to straighten or replace.
What Does a Gate Repair Call Include?
A gate repair visit from Ironworks Gate Co. Mesquite follows the same steps every time, so you know what you are paying for before anyone arrives.
- Diagnosis. We look at the whole gate, not just the part that failed: hinges, frame, welds, track, rollers, motor, control board, sensors, and wiring. This is how we catch the second problem before it becomes a second bill.
- Upfront price. We give you the full price, in plain numbers, before we start. No surprises on the bill.
- The repair. Most jobs are finished in a single visit, using the right part for your brand of opener. Our technicians have up to 13 years of experience and are background-checked and uniformed.
- Test and walk-through. We run the gate through open and close cycles, check the safety reversal, and show you what we did.
- The guarantee. Every job is covered by the written 90-Day Done Right Promise. If it is not right, we come back and make it right, no arguing.
Want the full picture on what we repair? See our Gate Repair in Mesquite page for the complete list of services.
How to Save on Gate Repair
A few habits keep a Mesquite gate out of the high end of the price range.
- Catch the drag early. A gate that scrapes on the ground or needs a hard shove is telling you the hinge or roller is wearing. A $175-$280 hinge fix now beats a $280-$650 motor repair later.
- Clear the sand. Blowing sand settles into tracks and hinge pins. Hosing or brushing the track a few times a season, especially after a wind event, extends roller and hinge life in this climate.
- Get a second opinion on any written estimate. We offer a free second opinion if you have a quote in hand from another shop, so you can see how it compares before you commit.
- Take the standing offers. We run $50 Off Any Repair Over $250, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. All three stack onto the tune-up habit that heads off the big repairs.
- Ask before a replacement. Many gates that look finished just need frame and weld work. Ask us whether a repair will hold before you spend on a new gate.
We also offer free estimates. Call us and we will give you a straight range for your gate before we come out.
Is It Cheaper to Repair or Replace a Gate in Mesquite?
Repair is cheaper in most cases. A hinge, weld, or motor repair at $175 to $650 almost always costs less than a new gate starting near $1,800, so replacement only makes sense when the frame is structurally beyond saving or the gate has been patched so many times the next failure is guaranteed. A 20-year-old gate with a cracked weld and a tired motor is often worth the $200-$450 frame fix plus a motor service, and it will close like it did the day it was hung. We will tell you honestly which your gate needs. Call (844) 797-2573 for a free estimate.
Why Does Gate Repair Cost More Than a Handyman Quote?
A handyman quote is usually lower because it covers one part, not the whole system. A gate is a mechanical and electrical assembly: hinges, frame, track, motor, control board, and safety sensors all interact. A cheap hinge swap on a gate with a worn roller will fail again in a few months, and then you pay twice. A gate specialist diagnoses the whole system the first time and makes the correct fix on the first visit, whatever is on the driveway. Our technicians have up to 13 years of experience, so the diagnosis is not guesswork. If you have a lower quote in hand, we will take a free look at it and give you a second opinion before you decide. Call (844) 797-2573.
Can I get an exact gate repair price over the phone?
We can usually give you a close range over the phone and a firm number on site. Most jobs fall into a predictable band, so describing your gate, its brand, and what it is doing gets us most of the way to a firm price. A live person answers every call, 24 hours a day, so call (844) 797-2573 and we will talk it through.
FAQs – Gate Repair Cost
How much does it cost to repair a gate in Mesquite?
Most repairs run $175 to $650, with a typical job around $240 to $380. A hinge or latch fix sits at the low end near $175 to $280, and a motor or opener repair runs $280 to $650. Call (844) 797-2573 for an exact quote, and estimates are free.
How much does it cost to fix a gate motor or opener?
Gate motor and opener repair runs $280 to $650 in Mesquite, depending on the brand and whether it needs a control board. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we often have the correct part on the first visit. Call (844) 797-2573 to price your system.
Is it cheaper to repair or replace a gate?
Repair is cheaper. A repair at $175 to $650 almost always beats a replacement starting near $1,800. Replacement is the answer only when the frame is beyond saving. Call (844) 797-2573 for a free estimate and a straight answer on your gate.
How much does an automatic gate opener or access-control keypad cost to repair?
Access control and keypad repair runs $250 to $600, and an automatic opener repair runs $280 to $650. Wiring a gate that was never automated adds to the total. Call (844) 797-2573 and we will price your setup.
Can you come today, and what does a service call cost?
Most Mesquite gate repairs are finished in a single visit, and a live person answers the phone 24 hours a day. The service call itself is folded into the repair price, which we settle upfront before we start. Call (844) 797-2573 to book a visit.
Contact Ironworks Gate Co. Mesquite for a Free Estimate
A gate that works is one less thing to think about. Ironworks Gate Co. Mesquite handles the full scope, from hinges and welds to motors and keypads, and stands behind every job with the written 90-Day Done Right Promise. We give you an upfront price and no surprises on the bill. Call (844) 797-2573 for your free estimate, and a live person will answer, day or night.
You can also start at our home page to see everything we do for Mesquite driveways and estate gates.
Pricing reflects the Mesquite market as of 2026. Ironworks Gate Co. Mesquite offers free estimates – call (844) 797-2573.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson