Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Mesquite, NV
A pedestrian gate in Mesquite is a separate walk-through gate for people, set alongside or within your driveway gate line so you can come and go on foot without opening the big gate. Homeowners here order them for mail, for guests, for pool and patio access, and for the simple reason that a wide driveway gate isn’t meant to be cycled every time someone wants the newspaper. Ironworks Gate Co. Mesquite builds and installs them as part of our Gate Installation in Mesquite work, so the walk gate and the drive gate are hung, aligned and automated together instead of fighting each other. If your gate line needs a walk-through that closes clean on the first try, call us at (844) 797-2573.
A pedestrian gate sounds like a small job until you’ve watched a cheap one sag three months after it went up. Ours are welded, hinged and set with the same care we give a full driveway system, and every one is covered by our written 90-Day Done Right Promise. Our technicians have up to 13 years of experience, and we work on the automation side too: DoorKing, Elite, LiftMaster and six more brands, serviced in-house so the latch, the closer and the keypad all speak to each other.
Key Takeaways
- A pedestrian gate gives you walk-through access without cycling your driveway gate.
- Most Mesquite walk gates come in between $1,100 and $3,400 installed, depending on material, width and whether it’s automated or self-closing.
- We set prices upfront before any work starts, and every job carries the 90-Day Done Right Promise in writing.
- A live person answers the phone 24 hours a day, 7 days a week at (844) 797-2573.
When You Need Pedestrian Gate
Most of the calls we take for walk gates come from a specific frustration, not a wish list. Here’s what we hear in Mesquite.
- You’re tired of opening the driveway gate on foot. Cycling a 12-foot slide gate every time you grab the mail wears the motor and the track faster than most people realize.
- A pool or patio needs controlled access. If the pool sits behind your driveway gate, a self-closing walk gate keeps the space closed to kids and pets without a full perimeter rebuild.
- The property line has a gap. In the newer subdivisions off Falcon Ridge and near the Rising Star area, the side yard often has an unmade gap where a walk gate belongs.
- You want a delivery or service entrance. A smaller gate on the far side of the driveway lets a landscaper or delivery in without opening the main span. Useful during the long summer, when you don’t want to walk out to the street in the heat.
- The existing walk gate has started to drag. Wind and settling ground in this valley will make a light gate rub and slam within a season or two. We get called to rehang far more pedestrian gates than you’d expect.
- You need access control on foot. A keypad or intercom on a walk gate lets family and regular visitors in without a remote.
How a Pedestrian Gate Works
A walk gate is a hinged panel, usually between 3 and 5 feet wide, hung on posts set in concrete and fitted with hinges, a latch and either a closer or a low-voltage operator. The panel does the work; the posts take the load. Get the posts wrong and the gate sags, drags, or never latches on the first swing.
We won’t talk anyone through setting posts or tuning a gate operator over the phone, and that’s deliberate. A gate panel is heavy, and a tensioned return or a spring closer that lets go can injure hands and wrists. That kind of work should be handled by someone who’s been trained on it, with the right tools in hand. What you can reasonably check yourself: whether the gate drags when it swings, whether the latch lines up, and whether the post moves when you push on it.
Our Pedestrian Gate Process
Here’s how a walk gate job runs with us, start to finish.
- Phone call and site visit. You call (844) 797-2573, a live person answers, and we set a visit. We look at the gate line, the ground, the existing driveway gate and how the two will meet.
- Plan and upfront price. We give you a written price before any digging or welding. You’ll know what it costs, what’s included, and what the timeline is. No bolt is turned until you’re settled on the number.
- Setting the posts. Posts get set in concrete to the depth the local soil and wind load call for. This is the step that decides whether the gate still swings true in year five.
- Building and hanging the panel. The gate is built to your width and material, then hung on the posts. We align the hinges, set the latch, and confirm closure by hand before any closer or operator goes on.
- Fitting the hardware and automation. Closer, latch, keypad, intercom or low-voltage operator. On the automation side we’re trained on nine major brands, including DoorKing, Elite and LiftMaster, so the walk gate can share a keypad or intercom with the drive gate.
- Walk test and hand-off. We cycle the gate, check the latch every time, and walk you through it. Then we leave you the guarantee in writing.
Pedestrian Gate Pricing in Mesquite
Pedestrian gate installation in Mesquite generally runs from about $1,100 to $3,400, depending on material, width and whether it’s automated. That covers the gate, hardware and setting the posts. Here’s the range, line by line.
| What you’re buying | Typical range in Mesquite |
|---|---|
| Basic walk gate, standard width, manual latch | $1,100 – $1,700 |
| Wider gate or heavier frame, manual | $1,700 – $2,300 |
| Self-closing gate with closer | $1,800 – $2,500 |
| Automated pedestrian gate with keypad | $2,600 – $3,400 |
| Rehang or repair of an existing walk gate | $225 – $700 |
What moves the number: the gate width, the material, whether there’s already a concrete pad or we’re setting new posts, and whether you want access control. If your walk gate is being added alongside a new driveway gate, we price both together and save on the trip. And every completed job comes with the 90-Day Done Right Promise in writing; if it isn’t right, we come back and make it right.
A couple of standing offers help. Take $50 off any repair over $250, get a free second opinion on any written estimate, book our $89 seasonal tune-up, and the 5% Senior and Veteran discount applies to every job, every time.
Things Worth Knowing in Mesquite
A few Mesquite-specific notes that come up often with walk gates.
- The ground moves. Our valley soil and shallow grade mean a gate post set without enough depth will shift with a wet winter or two. We set posts for it the first time.
- The wind will find a loose gate. A gate that catches wind will fold a cheap hinge. We fit heavier hinges and latches that hold under it.
- Gate lines and walk gates should be planned together. If you’re already replacing a driveway gate (see our Gate Installation in Mesquite page), adding a walk gate at the same time saves on the trip and keeps the two gates sharing a keypad instead of needing separate ones.
We repair and service what we install too. Gate repair in Mesquite includes rehangs and hinge work on existing walk gates. If you want your gate automation and access control to share a keypad or intercom, gate access control in Mesquite covers that. For motor and opener service on any gate, gate motors and openers is the page. And when a hinge or weld needs work, gate parts and welding covers it.
We also serve nearby homeowners. See our pages for home, Gate Installation in Mesquite, pedestrian gate in Bunkerville, pedestrian gate in Overton, pedestrian gate in Las Vegas, pedestrian gate in Henderson, and pedestrian gate in Boulder City.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Mesquite?
Pedestrian gate installation in Mesquite typically runs $1,100 to $3,400 installed. A basic manual walk gate sits around $1,100 to $1,700; a self-closing or automated gate runs higher. Call (844) 797-2573 for an exact quote. Estimates are free.
Can you add a walk gate next to my existing driveway gate?
Yes, in most cases we can add a pedestrian gate beside an existing driveway gate. We look at the gate line, the concrete, and whether the walk gate can share the same keypad or intercom as the drive gate. Call (844) 797-2573 and we’ll walk through it.
How long does pedestrian gate installation take?
Most walk gates are completed in a single visit. Setting the posts, hanging the panel, fitting hardware and testing the latch is usually a one-day job. If access control is going in, allow for an extra pass to wire and program it. Call (844) 797-2573 to book a visit.
Do you repair a walk gate that’s dragging or won’t latch?
Yes, we rehang and repair old pedestrian gates regularly. Hinge work and rehangs typically run $225 to $700, and the $50 off any repair over $250 offer applies. Call (844) 797-2573 and we’ll get out to look at it.
Call Ironworks Gate Co. Mesquite
If a walk gate makes sense for your property, or if the one you have is dragging and won’t close, call (844) 797-2573. A live person answers, day or night. We’ll give you an upfront price before anything gets started, and we’ll back the finished job with the 90-Day Done Right Promise in writing. Doing it right the first time is the whole job.
Written by the team at Ironworks Gate Co. Mesquite.