Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Mesquite, NV
Electric gate repair in Mesquite usually means a gate that has stopped moving, moves in the wrong direction, or opens partway and then gives up, and most of these problems trace back to the operator, the safety sensors, or a failing motor control board. We fix those systems, diagnose them on the first visit, and settle the price with you before we turn a single bolt. Call (844) 797-2573 and a live person will answer, any hour of the day or night.
Automated gates are a different animal from a manual swing or slide gate. The gate might be perfectly hung and swinging true, and the trouble still lives in the opener: a burned-out control board, a jammed limit switch, a safety loop that thinks a car is parked on it, or a keypad that stopped talking to the receiver. That is why we keep our gate repair services focused on both halves of the job. Our technicians have up to 13 years of experience, and we’re trained and equipped on nine major gate-automation brands, including DoorKing, Elite, and Mighty Mule. Whatever operator is bolted to your driveway, the correct fix happens on the first visit. This page covers the electric and automatic side of the work. For hinges, welds, and the physical gate itself, see our main Gate Repair in Mesquite page, or the broader gate repair overview for the full scope.
When You Need Electric Gate Repair
Mesquite sits down in the Virgin River valley, and the combination of triple-digit summer afternoons and sudden windy stretches does automated gate hardware no favors. Control boards get hot inside their enclosures on a west-facing driveway in July. Dust and grit work into limit switches. And the first cold snap of January can stall a motor that was already running weak. Here are the symptoms we get called about most:
- The gate won’t move at all. You press the remote, hear a click from the operator housing, and nothing happens. Nine times out of ten this is the control board, a blown fuse, or a dead receiver rather than the motor itself.
- The gate opens partway and stops. A limit switch that’s drifted or a clutch that’s slipped can leave the gate parked at half travel. Common on older LiftMaster operators in the Sun City and Highland Hills neighborhoods.
- The gate reverses or won’t close. Safety sensors and photo-beams are designed to stop a gate from closing on a person or vehicle. When they get misaligned by wind, dirt, or a knocked post, the gate refuses to close and looks broken when it’s only protecting you.
- The remote or keypad works intermittently. Weak batteries, an antenna that’s worked loose, or interference on the receiver frequency all cause a gate that obeys you some days and ignores you others.
- Grinding, squealing, or a loud clunk at each end of travel. Mechanical noise from the operator often means worn gears or a chain that’s out of adjustment. Left alone, it wears the motor out too.
- Battery backup won’t hold. During a power outage the gate should still cycle on its backup battery. When it drops out the first time the power flickers, the battery needs replacement, not a whole new operator.
Our Electric Gate Repair Process
We work the same way on every job, whether it’s a residential swing gate off Interstate Drive or a long slide gate on a desert lot outside town.
- Listen to what the gate is doing. We start with a conversation about when the trouble began and what changed. Then we run the gate through a full cycle ourselves and watch and listen to the operator, not just the gate.
- Test the electrical and control side. We check incoming power, fuses, the control board, limit switches, receiver, and safety sensors one at a time so we find the actual fault instead of guessing. This is where brand familiarity earns its keep, whether your operator is a DoorKing slide unit or a Mighty Mule swing kit.
- Inspect the mechanical load. An operator that struggles is often fighting a gate that’s dragging, sagging, or binding on its track or hinges. We check the gate itself so we don’t replace a motor that was fine and leave the real problem in place.
- Give you the price before we touch anything. No-hassle upfront pricing, settled with you before a bolt is turned. If a part is needed, you’ll know exactly what it costs and why.
- Make the repair and run it hard. We complete most jobs in a single visit, then cycle the gate repeatedly and test the safety sensors and backup battery before we pack up.
- Back it up in writing. Every completed job is covered by our 90-Day Done Right Promise. If it isn’t right, we come back and make it right, with no paperwork and no arguing.
One word of caution before you reach for a wrench: an automatic gate operator carries real electrical current and stores mechanical force, and the springs and arms that move a heavy gate can injure you badly if they release under load. This is work for a trained technician, not a weekend project. We’d rather you call us than hurt yourself trying to save a service call.
Electric Gate Repair Pricing in Mesquite
Most electric gate repairs in Mesquite run between $150 and $450 for common fixes like control boards, receivers, sensors, and limit switches, plus the cost of any parts. A full operator replacement, when the motor or board is past saving, typically lands between $750 and $1,800 depending on the gate’s size and whether we’re swapping a like-for-like unit or upgrading. We give a free estimate, and the numbers below are the honest ranges we see in this valley:
- Safety sensor or photo-beam repair/replace: roughly $120 to $280
- Limit switch adjustment or replacement: roughly $130 to $250
- Control board replacement: roughly $250 to $550 (varies by brand and board)
- Receiver, remote, or keypad work: roughly $100 to $260
- Backup battery replacement: roughly $90 to $200
- Full operator and motor replacement: roughly $750 to $1,800
What moves the price: the brand and age of the operator, whether parts are still available (some older units have boards that are harder to source), whether the gate also needs mechanical repair, and how far the operator is from power. A couple of current offers help here. We take $50 off any repair over $250, we’ll give you a free second opinion on any written estimate another company has already handed you, and there’s a standing 5% senior and veteran discount on every job. We’d also suggest our $89 seasonal tune-up; a gate serviced before the summer heat is a gate that isn’t calling us in July.
Don’t take a first number you’re unsure about. Call (844) 797-2573 for a free estimate from a live person who’ll tell you straight what’s wrong and what it costs to fix. A second opinion from a gate specialist costs you nothing and can save you a whole operator you didn’t need.
FAQs – Electric Gate Repair
Can you fix my electric gate the same day?
Most electric gate repairs in Mesquite are completed on a single visit, and same-day service is often possible when the fault is a sensor, limit switch, receiver, or battery. Control board and operator replacements depend on parts availability for your specific brand, and we’ll tell you that plainly up front. Call (844) 797-2573 and a live person answers any hour, so you’re not waiting until Monday morning to find out.
Is it cheaper to repair my gate operator or replace it?
Repair is cheaper in most cases, so we always look at the fix before the replacement. If the operator is a solid brand like LiftMaster or Elite and only a board, sensor, or switch has failed, repairing it is the right call and usually saves you hundreds of dollars. Replacement makes more sense when the motor is failing, parts are no longer made, or the unit is chronically under-matched to the weight of the gate. We’ll give you both numbers, honestly, and let you decide. Call us for a free second opinion on any estimate you’ve already been given.
Why does my gate open but not close?
A gate that opens but won’t close is almost always a safety sensor problem, not a broken motor. The photo-beams or safety edges stop the close cycle when they detect an obstruction, and they can trip from dust, wind misalignment, or a knocked post. That’s the gate protecting you, and the fix is realigning or replacing the sensor. Call (844) 797-2573 and we’ll sort it out and quote you before we start.
Do you service the gate brands I already have?
Yes. We’re trained and equipped on nine major gate-automation brands, including DoorKing, Elite, Mighty Mule, and LiftMaster, so the correct fix happens on the first visit whatever is on your driveway. We keep up-to-date with the current models and have seen the older units that are still humming along in Mesquite neighborhoods. If you’re not sure of the brand, that’s fine; we’ll identify it on arrival. Call (844) 797-2573 for a free estimate.
Contact Us for Electric Gate Repair in Mesquite
If your automated gate has stopped moving, closes partway, or won’t obey the remote, don’t let it sit broken or risk a repair yourself. Call (844) 797-2573 for a free estimate. A live person answers the phone 24 hours a day, 7 days a week, our technicians are background-checked and arrive in uniform, and every job comes with the 90-Day Done Right Promise in writing. Done right, and backed in writing.
Written by the team at Ironworks Gate Co. Mesquite, serving Mesquite.