Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Keypad & Intercom Repair: The Mesquite Owner’s Guide
Ghost Controls keypad and intercom repair in Mesquite usually runs $185 to $340 installed, and most of that work gets done on the first visit. We service the full Ghost Controls accessory line, stock nothing on a truck, and order exactly the part your model calls for. The part rarely dies all at once. Most Mesquite owners notice it in small ways first: the code that works on the third try, the call box that crackles instead of speaking, the keypad light that stayed dark after a rain.

Out here that pattern matters. Mesquite summers push past 110°F, and the UV and grit that come with them chew at keypad membranes and outdoor speaker housings faster than the manufacturer’s paperwork suggests. If your Ghost Controls keypad or intercom is starting to act its age, you’re in the right place. Call (844) 797-2573 and we’ll sort out which part you have and what it takes to fix it.
Key Takeaways
- Installed keypad and intercom repair for Ghost Controls runs roughly $185 to $340 in Mesquite, quoted before we touch anything.
- Most Ghost Controls keypads and intercoms last 6 to 10 years outdoors; Mesquite heat and sun tend to pull that toward the shorter end.
- We’re an independent service provider and not affiliated with Ghost Controls. We work on their equipment because it’s good equipment, not because we sell it.
- Every job we finish carries the 90-Day Done Right Promise, in writing.
Which Ghost Controls Models This Applies To
Ghost Controls builds its accessory line around its own control boards, so the keypad or intercom that fits one series won’t necessarily fit another. The label inside the control box or on the back of the keypad is where to start. Look for the model number stamped there, usually a letter-and-number combination, plus the series name on the opener arm or control board. Bring us a photo of that label and we can tell you what you’re working with before anyone drives out.
The compatibility gotcha most owners hit: Ghost Controls has revised its keypad wiring and connector style across production runs, and a keypad that looks identical on the outside can have a different pinout inside. Ordering by appearance alone is how people end up with a part that won’t talk to their board. We match by the control board revision, not the housing.
On the OEM-versus-aftermarket question, we’re plain about it. Ghost Controls’ own replacement parts are the safest match and what we recommend when the exact part is available. A quality aftermarket equivalent can work and often costs less, but only when the pinout and voltage match the board precisely. Guessing wrong here is a $200 mistake and a second trip. We’d rather order the right part once.
A quick measuring note: keypads and intercoms mount to the existing post or pedestal, and the post spacing rarely changes. What changes is the mounting hole pattern and the cable entry point. Measure both before you order anything. If you’re not sure, call us and we’ll walk you through it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Keypad & Intercom Repair Is Failing
Most of what fails on a Ghost Controls keypad or intercom shows up in one of five ways. Each points to a different culprit, which is why a symptom-first diagnosis saves money.
- Code works only sometimes. Usually the keypad membrane or the button contacts wearing out, common after years of Mesquite sun baking the pad. The board is often fine.
- Keypad light stays dark or flickers. Almost always a power or wiring issue at the control board, not the keypad itself. A voltage check at the board tells you which side of the wire the problem is on.
- Intercom crackles, cuts out, or is silent on one end. Typically the speaker element or the wire connection at the call station, and it can also be a worn cable jacket letting moisture in.
- Gate won’t respond to a valid code. The keypad may be sending fine and the board not receiving. This one needs a meter to call correctly.
- Intermittent operation in heat or after rain. A classic sign of a failing seal or a solder joint opening up with temperature. Mesquite’s heat swings tend to expose these early.
One honest safety note before you go further. Keypads and intercoms run on low-voltage wiring, but they connect to a control board that shares the same box as your gate operator’s higher-voltage supply. If you’re not comfortable working inside that enclosure with the power on, don’t. A shock from a gate operator panel is a real risk, and it’s not a job to learn on. Turn the breaker off and let a trained tech take it from there.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Ghost Controls keypad and intercom repair in Mesquite lands in the $185 to $340 range for most jobs. The range reflects real differences in the work, and we price each job on its own.
| Line item | Typical range |
|---|---|
| Diagnostic visit and board check | $75 to $125 |
| Ghost Controls-compatible keypad, installed | $185 to $265 |
| Intercom station repair or replacement, installed | $220 to $340 |
| Wiring repair or connector replacement | $95 to $180 |
What drives the number up: hardwired intercom runs where the cable has to be traced through buried conduit, a control board that needs a pigtail or adapter to accept the new part, and post work if the old keypad left the mounting holes stripped. What keeps it down: a straightforward keypad swap on a post with clean wiring.
Every price is quoted and agreed before a bolt is turned. No surprises on the bill. The work itself carries our 90-Day Done Right Promise, so if the part or our install isn’t right, we come back and make it right.
Current standing offers: $50 off any repair over $250, and a free second opinion on any written estimate if you’ve already been quoted elsewhere. Senior and veteran discount is 5 percent, always.
DIY or Call Us?
Some of this you can check safely. Keypad battery (on battery models), any obvious corrosion on the terminals, and whether the cable jacket is split or the wire is loose at the connector. A voltmeter at the board’s keypad terminals will tell you if power is reaching the keypad. That’s a reasonable check for a homeowner who’s comfortable with a meter and has the breaker off.
Where DIY goes wrong for this part: opening the operator’s control enclosure without killing power, ordering a replacement by appearance instead of board revision, and swapping a keypad that was never the problem because the fault is upstream in the wiring. We see all three, and every one of them turns a $200 job into a $400 job. Ghost Controls isn’t a brand you want to guess at.
If you’d rather hand it to someone who’s done it before, call (844) 797-2573. We service Ghost Controls alongside LiftMaster, Mighty Mule, DoorKing, and six other brands, so chances are good the right part is in our orbit. A live person answers, day or night.
FAQs
Most Ghost Controls keypads and intercoms last 6 to 10 years outdoors. In Mesquite, expect the shorter end of that range. The summer sun and temperature swings do more damage to gasket seals and membrane keypads than anything else, and a unit that sits in direct afternoon sun will age faster than one in shade. Call (844) 797-2573 for an exact quote on replacement, and the estimate is free.
Sometimes, yes. A failed wire connection, a loose terminal, or a cracked cable jacket can often be fixed without a new part. A dead keypad membrane or a failed speaker element almost always means replacing the unit. We diagnose first and tell you honestly which side of that line you’re on. Call (844) 797-2573 and we’ll set up the visit.
A standard keypad or intercom swap takes about an hour to an hour and a half once the part is in hand. If it’s hardwired through buried conduit and the wire needs tracing, plan on two to three hours. We’ll tell you which before we start, so there are no surprises on the bill. Call (844) 797-2573 for a free estimate.
We order by control board revision and model number, not by appearance. We’re an independent service provider, not affiliated with Ghost Controls, so we source through authorized parts channels and match the part to your specific opener series. We don’t carry parts on a truck; we order what you need and get it done right. Call (844) 797-2573 to get started.
Ironworks Gate Co. Mesquite is an independent service provider, not affiliated with Ghost Controls. We service Ghost Controls equipment because we know it well.
Written by the team at Ironworks Gate Co. Mesquite, serving Mesquite and nearby areas.