Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFAAC Gate Motor Replacement: The Mesquite Owner’s Guide
FAAC gate motor replacement in Mesquite typically runs $950 to $2,400 installed, depending on the operator series, gate weight, and whether the control board and safety edges need to come along with it. We’re an independent service provider, not affiliated with FAAC, and we install and service FAAC-compatible operators across Mesquite and the surrounding valley. Most motors we see fail in Mesquite die in one of three ways: a board that quits after a summer of 110-degree afternoons, a gearbox worn smooth by grit in the track, or a battery backup that stopped holding a charge two seasons ago. Owners usually find out the same way. The gate stops half-open on a Sunday evening, the remote clicks and nothing happens, and the click of a relay is the only sound left.

Which FAAC Models This Applies To
FAAC builds swing and barrier operators across several families, and the replacement path depends entirely on which one is bolted to your driveway. Residential swing operators are the most common on Mesquite properties: the 400, 412, 422, 390, and the S800H live in that group. Slide gate operators like the 740 and 844 turn up on wider ranch-style entries. Commercial barrier arms (the 615 and 620 series) are rare on a residential lot but do show up at smaller HOA entrances around town.
The first move is identifying your exact unit, and the label is the shortcut. Look for the data plate on the operator housing or inside the control enclosure. It carries the model, serial, and voltage. Photograph that plate before you call anyone, including us. FAAC changed gearbox ratios and control board connectors between production runs of the same model line, so a board that fits a 2015 build may not fit a 2019 of the same number. That’s the compatibility gotcha that bites most do-it-yourself buyers; the model number alone doesn’t guarantee the part.
On OEM versus aftermarket: genuine FAAC components cost more and match precisely. Quality aftermarket equivalents (gearboxes, limit switches, remotes) can save money on older units where OEM stock has thinned, but the board and the safety reverse circuit are places we don’t gamble. On a FAAC, that’s the part that protects whoever is standing under the gate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your FAAC Gate Motor Replacement Is Failing
Most FAAC failures announce themselves before the gate stops dead. Catch the early signs and you’re often looking at a repair; ignore them and the motor is the next line item.
- The gate moves in jerks or stalls partway. Usually a tired Capacitor or worn gearbox. FAAC capacitors are cheap, but the stalling wears the gear teeth while you wait.
- The motor runs but the arm doesn’t move. A stripped gearset inside the operator. In Mesquite’s dust, the grease thins and the gears grind themselves smooth.
- The gate reverses without warning or on the slightest contact. Failing safety edges or a misreading limit switch. This one is a safety problem, not just an annoyance.
- You press the remote and nothing happens, no relay click. Dead control board or a power supply that’s quit. Boards in Mesquite suffer from heat and voltage swings.
- The gate opens but won’t close, or stops half-travel. Limit switch out of adjustment or a board that’s lost its programming. Often reset-able; sometimes the sign of a dying board.
A note on lifespan reality: FAAC motors rated for 20 years in a mild climate give you closer to 10 to 14 in the Mesquite heat, where the operator housing bakes in direct sun. If you’re past the ten-year mark, weigh repair against replacement honestly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the range we quote in Mesquite, installed. Every price is settled before a bolt is turned, so nothing shows up on the bill later that wasn’t on the estimate.
- FAAC-compatible swing operator replacement (residential): $950 to $1,800 installed.
- Slide gate operator replacement: $1,300 to $2,400 installed, depending on gate weight and travel.
- Control board and safety-edge refresh (with motor): the bulk of the higher end of each range.
- Repair instead of replacement (capacitor, limits, remote): typically $150 to $450.
What drives the range: the operator model, gate weight and width, whether the hinge or track needs welding (we do that in-house), and whether wiring and safety edges are sound. Labor and parts are itemized, never bundled. Every replacement is covered by our 90-Day Done Right Promise, in writing. If it isn’t right, we come back and make it right. Standing offers apply too: $50 off any repair over $250, an $89 seasonal tune-up, and a 5% senior and veteran discount. Ask for a free second opinion on any written estimate you’ve been handed.
DIY or Call Us?
Some things you can check safely: the breaker, the fuse on the control board, the remote battery, and whether anything is jammed in the gate’s path. That’s about the ceiling for safe homeowner troubleshooting.
Gate operators are high-torque machinery with stored energy in the mechanism and line voltage at the board. Working inside the housing without isolating power can mean crushed fingers or a shock. We keep this plain because it matters: this is not spring-and-cable work, but it’s still not a job to learn on. Call (844) 797-2573 and a live person answers, any hour, any day. We’ll send a background-checked technician in uniform, with the right diagnostic gear, and most repairs are done in a single visit.
FAQs
Expect 10 to 14 years in Mesquite’s climate, shorter than the 20-year ratings you’ll see in spec sheets. Direct sun and summer heat wear the electronics and thin the grease faster than a coastal install.
Often, yes. Capacitors, limit switches, remotes, and even some boards are repairable, and we’ll tell you honestly when a repair makes sense. Once the gearbox is stripped or the housing is corroded through, replacement is the better money. Call (844) 797-2573 and we’ll diagnose it on site.
Most residential FAAC-compatible replacements take half a day to a full day, depending on gate type and wiring. We schedule the work, confirm the price in writing, and finish in one visit wherever parts allow.
We match your exact model and production run, ordering OEM where it matters (boards, safety circuits) and quality aftermarket where it doesn’t. We’re trained on nine brands and also service LiftMaster, Mighty Mule, and Ghost Controls, so the right part lands on the first visit.
Call (844) 797-2573 for a free estimate on FAAC gate motor replacement in Mesquite. A live person answers 24 hours a day, seven days a week.
Written by the team at Ironworks Gate Co. Mesquite, serving Mesquite and nearby areas.